Skip to main content

Yes, Wolverine 1000 Mile boots can be resoled, and that is exactly what they were built for. Every pair uses Goodyear welt construction, so at Cordonnerie Rockland we can remove the worn leather outsole and Vibram heel, renew the cork, and stitch a new sole to the original welt. The Horween leather upper you spent years breaking in stays yours.

Wolverine introduced the 1000 Mile in 1914 and named it for a promise: at least a thousand miles of wear. Owners quickly found the boots went much further than that, as long as someone looked after what sits underneath. That is our job. Since 1997, our Mont-Royal workshop at 1250 Beaumont Ave has rebuilt heritage boots for walk-in clients across Montreal and for mail-in customers coast to coast across Canada.

Canada-wide service: ship your 1000 Miles, get them back ready for the next thousand. Send Your Request

”Always very friendly, fast and above all, high-end service.

Nadine PaquinCustomer

Our mission: offer quality and durable repairs

Whatever the repair is needed, our team will always make sure to make the best recommendation. We will take the time to inform and help you make a decision. Our goal? To offer a well-made result that will stand the test of time, because we know how precious your favourite shoes or boots are on a daily basis. Our services will extend the life of your favourite accessories!

What Makes the Wolverine 1000 Mile Worth Resoling?

The Wolverine 1000 Mile is a heritage boot built in the dress-boot tradition rather than the heavy work-boot tradition. Its upper is cut from Horween leather from Chicago, most often Chromexcel, which darkens and creases into a patina unique to the wearer. Underneath, the standard model pairs a butyl-treated leather outsole with a Vibram rubber heel, a cork filler, and a Goodyear welt.

That combination is the reason the boot deserves a second sole. The upper is the expensive, irreplaceable part, and it is often in its prime just as the original leather sole wears through. Replacing the sole costs a fraction of a new pair and keeps a well-fitted boot out of the landfill.

Signs Your 1000 Mile Boots Need a Resole

Leather soles wear gradually, so the signs are easy to miss until a Montreal winter makes them obvious. Bring your boots in, or start a mail-in request, when you notice:

1. A soft or thin spot under the ball of the foot.
Press the sole with your thumb. If it flexes like cardboard, a hole is close.

2. The Vibram heel worn down at the back corner.
Most people strike the outside edge first. Replace the heel before the wear reaches the leather heel stack.

3. Gaps or broken stitches along the welt.
The stitching that holds the sole to the welt can wear through, especially at the toe.

4. The toe tip rounded off or scuffed through.
Catching the toe on stairs and pavement wears the front edge of the sole fastest.

5. Water getting in after salt and slush.
A worn sole lets moisture reach the cork and insole, and that damage is what turns a simple resole into a bigger repair.

The earlier you act, the more of the original boot we can keep. A resole done on time is almost always simpler than one done after the cork and insole have broken down.

How a Wolverine 1000 Mile Resole Is Done at Cordonnerie Rockland

Every pair is assessed by hand before any work begins, because no two pairs wear the same way. A typical Goodyear-welted resole at our Mont-Royal workshop follows these steps:

1. Inspection. We check the welt, the insole, the shank, and the upper for anything that needs attention beyond the sole.

2. Sole and heel removal. The old outsole stitching is cut and the worn leather sole and heel stack are removed carefully, leaving the welt intact.

3. Cork renewal. Compressed or crumbling cork filler is cleaned out and replaced, so the boot keeps its cushioning and its footprint.

4. Welt and insole repair. Loose or damaged welt sections are restitched. If the insole has cracked, we discuss options with you before going further.

5. New sole and heel. The new outsole is cemented, then stitched to the welt on our outsole stitcher. The heel is built and attached, then trimmed to match.

6. Edge and finish. Sole edges are trimmed, set, and dressed. The upper is cleaned and conditioned so the boot comes back looking cared for, not just repaired.

Turnaround depends on the condition of the boots and our workshop queue. We give you a realistic estimate when we assess your pair, and results may vary based on the condition of the boot.

The Pair in Our Workshop: A Vibram Londra Resole

For the pair in our recent video, we fitted a Vibram Londra (#2870) sole with its matching Londra heel. The Londra is a flat rubber sole with a separate heel, made for classic constructions that are stitched, like the Goodyear welt on the 1000 Mile.

Its island tread pattern grips wet pavement, and Vibram’s XS City compound resists water and oil, which suits Montreal sidewalks in every season. At about 5 mm thick, the Londra keeps the slim, dressy profile that makes a 1000 Mile look like a 1000 Mile.

Sole Options for Your 1000 Miles

You can keep the boot exactly as Wolverine made it, or adapt it to how you actually wear it. Common choices at Cordonnerie Rockland:

Leather sole with Vibram heel (original spec). The classic 1000 Mile look: slim, elegant, and dressy enough to wear with chinos.

Leather sole with a rubber half sole. A thin protective layer over the front of a new leather sole. It adds grip and slows wear without changing the profile much.

Full Vibram rubber sole. The most practical choice for Montreal winters. A slim city sole like the Vibram Londra keeps the boot’s dressy look while adding grip on wet pavement and slush, better resistance to salt, and longer wear between resoles.

Lug sole conversion. For owners who wear their 1000 Miles as true outdoor boots. This changes the look of the boot noticeably, so we will talk through it with you first.

Not sure which to choose? Our guide Vibram vs. Dainite vs. Commando explains the differences.

Caring for Horween Chromexcel Between Resoles

A new sole protects the bottom of the boot. The upper needs its own attention, especially through a salty Quebec winter.

Brush after every wear to lift dust and salt before it settles into the grain.

Wipe salt lines quickly with a damp cloth, then let the boots dry at room temperature, away from heaters.

Condition every few months with a quality leather balm. We use and sell Saphir Médaille d’Or 1925 Rénovateur, which nourishes Chromexcel without darkening it heavily.

Use cedar shoe trees to hold the shape and draw out moisture.

Rotate your boots so each pair gets a full day to dry.

For winter-specific advice, read how to neutralize salt damage before it ruins your boots.

Wolverine 1000 Mile Resole by Mail, Anywhere in Canada

You do not need to live in Montreal to have your 1000 Miles rebuilt at Cordonnerie Rockland. Our mail-in service works the same way for Wolverine as it does for the Red Wing boots we repair from coast to coast:

1. Send your request online with a few photos of the soles, heels, and welt.

2. Receive your quote and shipping instructions.

3. Ship your boots to our workshop at 1250 Beaumont Ave, Mount Royal, Quebec.

4. We rebuild them and send them back to your door.

Because the work stays in Canada, there is no cross-border shipping and no customs paperwork to deal with.

Why Choose Cordonnerie Rockland for Your Wolverine Boots?

In business since 1997. More than 28 years of resoling Goodyear-welted boots and dress shoes.

Heritage boot experience. We regularly rebuild Red Wing, Allen Edmonds, Thorogood, and Blundstone footwear, alongside Wolverine.

Original-spec or upgraded soles. Leather, half soles, Vibram, and lug options, chosen with you.

Canada-wide mail-in service. Expert repair from anywhere in the country, without crossing the border.

A standalone Mont-Royal workshop. Walk in at 1250 Beaumont Ave, or call 514-342-6455.

Frequently Asked Questions

Can Wolverine 1000 Mile boots be resoled?

Yes. Wolverine 1000 Mile boots use Goodyear welt construction, which was designed so the sole can be replaced. At Cordonnerie Rockland, we remove the worn outsole and heel, renew the cork filler, and stitch a new sole to the original welt. The Horween leather upper stays intact, so your broken-in fit and patina are preserved.

How many times can you resole Wolverine 1000 Mile boots?

A well-maintained pair can usually be resoled several times. The limit is the condition of the welt and insole, not the sole itself. Resoling before the sole wears through to the cork protects those parts and extends the life of the boot. We assess every pair individually, and results may vary based on condition.

Should I replace the leather sole with a Vibram sole?

It depends on how you wear them. The original leather sole with a Vibram heel suits city and office wear. A slim Vibram rubber sole such as the Londra grips better on wet pavement and stands up to salt and slush, which makes sense for Montreal winters. A rubber half sole over new leather is a good middle ground.

How long does a Wolverine 1000 Mile resole take?

Turnaround depends on the condition of your boots and our current workshop queue. A straightforward resole is quicker than one that needs welt, insole, or cork repairs. We give you a realistic estimate when we assess your pair, whether you visit our Mont-Royal workshop or send your boots by mail.

Can I mail my Wolverine boots to Cordonnerie Rockland from outside Quebec?

Yes. Cordonnerie Rockland accepts mail-in repairs from anywhere in Canada. Send your request online with photos, receive a quote and shipping instructions, then ship your boots to 1250 Beaumont Ave, Mount Royal, Quebec. We rebuild them and ship them back to you, with no cross-border customs to manage.

How do I know when my 1000 Mile boots need a new sole?

Press under the ball of the foot. If the leather feels thin or flexes easily, a resole is due. Other signs include a heel worn down at the back corner, broken welt stitching, a scuffed-through toe tip, or water getting in. Acting early keeps the repair simpler and protects the cork and insole.

Key Takeaways

  • The Wolverine 1000 Mile, introduced in 1914, uses Goodyear welt construction, so it can be resoled repeatedly.
  • Resole before the leather sole wears through to protect the cork, welt, and insole.
  • Options range from the original leather sole with Vibram heel to a slim Vibram Londra rubber sole for Montreal winters.
  • Horween Chromexcel uppers need regular brushing, conditioning, and salt removal between resoles.
  • Cordonnerie Rockland resoles 1000 Miles at its Mont-Royal workshop and by mail across Canada, with no customs to deal with.

Wherever you are in Canada, expert repair is one shipment away. Questions? Visit us at 1250 Beaumont Ave, Mount Royal, or call 514-342-6455.

Close Menu

CORDONNERIE ROCKLAND

1250 Beaumont Ave,
Mount Royal, Quebec
H3P 3E5

OPENING HOURS
Mon to Wed : 9:30am – 6pm
Thu : 9:30am – 7pm
Fri : 9:30am – 6pm
Sat : 9am – 5pm
Sun : Closed